A Livestock Lighting Specification Starts Before Product Selection
Livestock luminaires can operate 12-18 hours a day in humid, dusty and ammonia-rich conditions. A useful specification therefore does more than name an IP rating or a wattage: it records where the light will be installed, how that zone is cleaned, what the animal-management programme requires and what evidence the supplier must provide.
This guide is designed for buyers preparing an RFQ, tender schedule or project brief across dairy, poultry and pig facilities. It complements—not replaces—the animal-specific guidance in ShineLong’s chicken-farm lighting guide.
What Information Should a Livestock Lighting RFQ Include?
Ask the farm manager, installer and lighting supplier to work from the same project inputs. This prevents a single general-purpose fixture from being specified across areas with different animal, cleaning and maintenance requirements.
Building and Installation Inputs
- Zone name, dimensions and mounting height
- Mounting method and existing electrical arrangement
- Dust, humidity, ammonia and impact exposure
- Cleaning method, frequency, water temperature and pressure
- Access requirements for inspection and replacement
Lighting and Management Inputs
- Animal type, housing stage and daily management routine
- Target lux at the animal level and uniformity requirement
- Photoperiod, scheduled transitions and blackout requirements
- Flicker performance, dimming protocol and control interface
- Required documents, certifications, warranty and project approvals
How to Divide a Livestock Facility Into Lighting Specification Zones
| Zone | Specification Focus | Information to Confirm |
|---|---|---|
| Animal-Housing Zone | Stable light level, distribution, flicker performance and controllable transitions. | Target lux at animal level, photoperiod, mounting height, glare considerations and dimming method. |
| Wet or Washdown Zone | Ingress protection, corrosion resistance, sealing and cleaning compatibility. | Water pressure, temperature, detergent exposure, cable entry and required IP/IK evidence. |
| Feed, Service or Corridor Zone | Safe access, maintenance practicality and task-appropriate visibility. | Operating hours, sensor or switching logic, maintenance access and emergency requirements. |
| Exterior or Transition Zone | Weather exposure, mounting security and control handover between areas. | Outdoor exposure, temperature range, cable routing and fixture mounting detail. |
How Should Dairy, Poultry and Pig Requirements Appear in the Specification?
The table below preserves the planning ranges in the source brief while turning them into procurement inputs. Final targets should be confirmed through the farm’s management programme, local requirements and a project lighting design.
| Livestock Application | Source-Brief Planning Range | Specification Question | Project Evidence to Request |
|---|---|---|---|
| Dairy Cows | Long-day programmes may use 16-18 hours of light; 150-200 lux at cow eye level; warm white around 3000K or natural white. | How will the layout achieve uniform light at cow level without creating difficult maintenance zones? | Photometric layout, mounting drawing, selected CCT, control schedule and maintenance plan. |
| Poultry | 20 lux during brooding and 5-10 lux during growing in the source brief; dimming and red-white programming may be considered by stage. | Which spectrum, lux range and transition programme match the farm’s production stage? | Flicker specification, dimming curve, control compatibility and poultry-management approval. |
| Pigs | 50-100 lux with a clear day-to-night transition in the source brief; compatible 0-10V or DALI dimming where required. | Can the proposed system make gradual, repeatable transitions across the required zones? | Control diagram, dimming protocol, scene schedule and installed-lighting commissioning plan. |
The ranges are planning inputs from the supplied source brief, not universal operating prescriptions. Verify final values for the animal type, production stage, jurisdiction and farm-management programme.
What Should Buyers Check in a Livestock Lighting Submittal?
A manufacturer’s product page is a starting point, not a complete submittal. For high-washdown or corrosive areas, compare the precise selected configuration with its project documents. ShineLong’s Rancher IP69K LED tri-proof light is one option to evaluate where its documented configuration matches the site requirements.
- Protection and construction: IP and IK declarations, enclosure material, cable entry, mounting hardware and washdown compatibility.
- Optical performance: System efficacy, light distribution, beam angle, selected CCT, CRI and project photometric results.
- Driver and controls: Flicker information, dimming protocol, compatible control hardware and transition behaviour.
- Reliability evidence: Product data sheet, relevant test reports, warranty terms and service contact.
- Installation evidence: Dimensions, wiring, mounting instructions, accessories and commissioning responsibilities.
Use the Right Resource for Each Livestock Lighting Decision
This specification guide explains how to prepare project inputs. Use the related pages below for animal-specific, product-specific and documentation-specific questions.
Poultry Lighting Programme
Review poultry-specific spectrum, photoperiod and production-stage considerations separately from the site-wide specification.
Read the Poultry Guide →Cow-House Lighting Options
Explore lighting options for cattle housing after establishing the required layout, environment and control inputs.
Explore Cow-House Lighting →Technical Documents
Review available certification and technical-document resources during supplier and configuration approval.
Review Technical Documents →Frequently Asked Questions About Livestock Lighting Specifications
Specify the Farm Environment Before Selecting the LED Fixture
ShineLong believes a useful livestock lighting specification connects animal-management needs with the actual building, cleaning routine, controls and maintenance plan. When those inputs are documented first, buyers can assess technical evidence and select the right configuration for every zone with greater confidence.
Need Help Reviewing a Livestock Lighting Specification?
Send your zone layout, mounting heights, cleaning method, target lux and control requirements. ShineLong can help review a suitable LED lighting configuration and supporting technical documents.
Get a Customized SolutionLatest Articles
Loading latest articles...